Tutorials

[rkeane]

well tried to install new GUI and

PS C:\Users\PC\Documents\VocalRemoverGUI> pip install Pillow==2.2.1
Collecting Pillow==2.2.1
Downloading Pillow-2.2.1.zip (2.2 MB)
|████████████████████████████████| 2.2 MB 1.3 MB/s
Using legacy setup.py install for Pillow, since package 'wheel' is not installed.
ERROR: torchvision 0.6.0+cu101 has requirement pillow>=4.1.1, but you'll have pillow 2.2.1 which is incompatible.
Installing collected packages: Pillow
Attempting uninstall: Pillow
Found existing installation: Pillow 7.1.2
Uninstalling Pillow-7.1.2:
Successfully uninstalled Pillow-7.1.2
Running setup.py install for Pillow ... error
ERROR: Command errored out with exit status 1:
command: 'c:\users\pc\appdata\local\programs\python\python3 7\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\PC\\AppData\\Local\\Temp\\pip-install-ataky_5m\\Pillow\\setup.py'"'"'; __file__='"'"'C:\\Users\\PC\\AppData\\Local\\Temp\\pip-install-ataky_5m\\Pillow\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\PC\AppData\Local\Temp\pip-record-1lo3mhgn\install-record.txt' --single-version-externally-managed --compile --install-headers 'c:\users\pc\appdata\local\programs\python\python3 7\Include\Pillow'
cwd: C:\Users\PC\AppData\Local\Temp\pip-install-ataky_5m\Pillow\
Complete output (100 lines):
running install
running build
running build_py
creating build
creating build\lib.win-amd64-3.7
creating build\lib.win-amd64-3.7\PIL
copying PIL\ArgImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\BdfFontFile.py -> build\lib.win-amd64-3.7\PIL
copying PIL\BmpImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\BufrStubImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ContainerIO.py -> build\lib.win-amd64-3.7\PIL
copying PIL\CurImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\DcxImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\EpsImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ExifTags.py -> build\lib.win-amd64-3.7\PIL
copying PIL\FitsStubImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\FliImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\FontFile.py -> build\lib.win-amd64-3.7\PIL
copying PIL\FpxImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\GbrImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\GdImageFile.py -> build\lib.win-amd64-3.7\PIL
copying PIL\GifImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\GimpGradientFile.py -> build\lib.win-amd64-3.7\PIL
copying PIL\GimpPaletteFile.py -> build\lib.win-amd64-3.7\PIL
copying PIL\GribStubImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\Hdf5StubImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\IcnsImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\IcoImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\Image.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageChops.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageCms.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageColor.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageDraw.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageDraw2.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageEnhance.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageFile.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageFileIO.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageFilter.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageFont.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageGrab.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageMath.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageMode.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageOps.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImagePalette.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImagePath.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageQt.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageSequence.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageShow.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageStat.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageTk.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageTransform.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImageWin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\ImtImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\IptcImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\JpegImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\JpegPresets.py -> build\lib.win-amd64-3.7\PIL
copying PIL\McIdasImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\MicImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\MpegImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\MspImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\OleFileIO.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PaletteFile.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PalmImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PcdImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PcfFontFile.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PcxImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PdfImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PixarImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PngImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PpmImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PsdImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\PSDraw.py -> build\lib.win-amd64-3.7\PIL
copying PIL\SgiImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\SpiderImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\SunImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\TarIO.py -> build\lib.win-amd64-3.7\PIL
copying PIL\tests.py -> build\lib.win-amd64-3.7\PIL
copying PIL\TgaImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\TiffImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\TiffTags.py -> build\lib.win-amd64-3.7\PIL
copying PIL\WalImageFile.py -> build\lib.win-amd64-3.7\PIL
copying PIL\WebPImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\WmfImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\XbmImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\XpmImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\XVThumbImagePlugin.py -> build\lib.win-amd64-3.7\PIL
copying PIL\_binary.py -> build\lib.win-amd64-3.7\PIL
copying PIL\_util.py -> build\lib.win-amd64-3.7\PIL
copying PIL\__init__.py -> build\lib.win-amd64-3.7\PIL
running egg_info
writing Pillow.egg-info\PKG-INFO
writing dependency_links to Pillow.egg-info\dependency_links.txt
writing top-level names to Pillow.egg-info\top_level.txt
reading manifest file 'Pillow.egg-info\SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'Pillow.egg-info\SOURCES.txt'
running build_ext
building 'PIL._imaging' extension
error: Microsoft Visual C++ 14.0 is required. Get it with "Microsoft Visual C++ Build Tools": https://visualstudio.microsoft.com/downloads/
----------------------------------------
Rolling back uninstall of Pillow
Moving to c:\users\pc\appdata\local\programs\python\python37 \lib\site-packages\pil\
from c:\users\pc\appdata\local\programs\python\python37 \lib\site-packages\~il
Moving to c:\users\pc\appdata\local\programs\python\python37 \lib\site-packages\pillow-7.1.2.dist-info\
from c:\users\pc\appdata\local\programs\python\python37 \lib\site-packages\~illow-7.1.2.dist-info
ERROR: Command errored out with exit status 1: 'c:\users\pc\appdata\local\programs\python\python3 7\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\PC\\AppData\\Local\\Temp\\pip-install-ataky_5m\\Pillow\\setup.py'"'"'; __file__='"'"'C:\\Users\\PC\\AppData\\Local\\Temp\\pip-install-ataky_5m\\Pillow\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\PC\AppData\Local\Temp\pip-record-1lo3mhgn\install-record.txt' --single-version-externally-managed --compile --install-headers 'c:\users\pc\appdata\local\programs\python\python3 7\Include\Pillow' Check the logs for full command output.



everything else installed apart from pillow

[Anjok]

well tried to install new GUI and....
building 'PIL._imaging' extension
error: Microsoft Visual C++ 14.0 is required. Get it with "Microsoft Visual C++ Build Tools": https://visualstudio.microsoft.com/downloads/
----------------------------------------
Rolling back uninstall of Pillow
Moving to c:\users\pc\appdata\local\programs\python\python37 \lib\site-packages\pil\
from c:\users\pc\appdata\local\programs\python\python37 \lib\site-packages\~il
Moving to c:\users\pc\appdata\local\programs\python\python37 \lib\site-packages\pillow-7.1.2.dist-info\
from c:\users\pc\appdata\local\programs\python\python37 \lib\site-packages\~illow-7.1.2.dist-info
ERROR: Command errored out with exit status 1: 'c:\users\pc\appdata\local\programs\python\python3 7\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\PC\\AppData\\Local\\Temp\\pip-install-ataky_5m\\Pillow\\setup.py'"'"'; __file__='"'"'C:\\Users\\PC\\AppData\\Local\\Temp\\pip-install-ataky_5m\\Pillow\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\PC\AppData\Local\Temp\pip-record-1lo3mhgn\install-record.txt' --single-version-externally-managed --compile --install-headers 'c:\users\pc\appdata\local\programs\python\python3 7\Include\Pillow' Check the logs for full command output.



everything else installed apart from pillow

Sorry for the confusion! I pasted the wrong version of pillow. Just run -

pip install Pillow

I also updated the main thread. Let me know if that works.

[rkeane]

Sorry for the confusion! I pasted the wrong version of pillow. Just run -

pip install Pillow

I also updated the main thread. Let me know if that works.

im really not sure what its meant to do......followed all your instructions pasted short cut to desktop.......press it .... cmd opens for 2 seconds then gone.....am i missing some thing else

[Anjok]

im really not sure what its meant to do......followed all your instructions pasted short cut to desktop.......press it .... cmd opens for 2 seconds then gone.....am i missing some thing else

Hmmm, I ran through my instructions on my other PC and I'm not having any issues with it on my end. There might be something else on your PC preventing it from working. I would recommend you uninstall everything and start from scratch. If you get the same issue, record your screen as the cmd opens and closes. From there, pause the recording on the cmd prompt and take a screenshot of the error so I can see exactly why it's failing.

[rkeane]

Hmmm, I ran through my instructions on my other PC and I'm not having any issues with it on my end. There might be something else on your PC preventing it from working. I would recommend you uninstall everything and start from scratch. If you get the same issue, record your screen as the cmd opens and closes. From there, pause the recording on the cmd prompt and take a screenshot of the error so I can see exactly why it's failing.

The fault I get is
Traceback (most recent call last):
File "C:\Users\rkean\Documents\VocalRemoverGUI\VocalRemo ver.py", line 22, in import torch
File "C:\Users|rkean\AppData\Local\Programs\Python\Pytho n37\lib\site-packages\torch\_init_.py", line 81, in ctypes.CDLL(dll)
File "C:\Users|rkean\AppData\Local\Programs\Python\Pytho n37\lib\site-packages\torch\_init_.py", line 364, in _init_ self. handle = dlopen(self._name, mode)
DSError: [WinError 126] The specified module could not be found

[chilinvilin]

The fault I get is
Traceback (most recent call last):
File "C:\Users\rkean\Documents\VocalRemoverGUI\VocalRemo ver.py", line 22, in import torch
File "C:\Users|rkean\AppData\Local\Programs\Python\Pytho n37\lib\site-packages\torch\_init_.py", line 81, in ctypes.CDLL(dll)
File "C:\Users|rkean\AppData\Local\Programs\Python\Pytho n37\lib\site-packages\torch\_init_.py", line 364, in _init_ self. handle = dlopen(self._name, mode)
DSError: [WinError 126] The specified module could not be found

Just curious if you had python installed before did you uninstall the version and reinstall and make sure the "install to path" was checked?

[Anjok]

The fault I get is
Traceback (most recent call last):
File "C:\Users\rkean\Documents\VocalRemoverGUI\VocalRemo ver.py", line 22, in import torch
File "C:\Users|rkean\AppData\Local\Programs\Python\Pytho n37\lib\site-packages\torch\_init_.py", line 81, in ctypes.CDLL(dll)
File "C:\Users|rkean\AppData\Local\Programs\Python\Pytho n37\lib\site-packages\torch\_init_.py", line 364, in _init_ self. handle = dlopen(self._name, mode)
DSError: [WinError 126] The specified module could not be found

Your system isn't detecting PyTorch. Do you have a stand-alone GPU, or is it intel graphics?

Just curious if you had python installed before did you uninstall the version and reinstall and make sure the "install to path" was checked?

This is also a good question^^^

[rkeane]

Your system isn't detecting PyTorch. Do you have a stand-alone GPU, or is it intel graphics?



This is also a good question^^^

sorry mate intel graphics
i also uninstalled python tried installing to path and unchecked but added the script to system variables and everything still installed
i have done a different url for torch.... pip install torch==1.5.0+cpu torchvision==0.6.0+cpu -f https://download.pytorch.org/whl/torch_stable.html
the only other thing that comes up is to update pip from 19.?? to 20.?? done that as well.....as i said a few days ago i had to reformat laptop and since then none of the vocal removers have worked...........i installed the GUI into my sons set up and it doesnt boot..........tried to do the cuda driver mentioned but it didnt install dunno if his drivers are more up to date than what i tried to put in


Microsoft Windows [Version 10.0.18363.836]
(c) 2019 Microsoft Corporation. All rights reserved.

C:\Users\rkean>pip install torch==1.5.0+cu101 torchvision==0.6.0+cu101 -f https://download.pytorch.org/whl/torch_stable.html
Looking in links: https://download.pytorch.org/whl/torch_stable.html
Collecting torch==1.5.0+cu101
Downloading https://download.pytorch.org/whl/cu1...-win_amd64.whl (858.0MB)
|████████████████████████████████| 858.0MB 2.6kB/s
Collecting torchvision==0.6.0+cu101
Downloading https://download.pytorch.org/whl/cu1...-win_amd64.whl (1.2MB)
|████████████████████████████████| 1.2MB 595kB/s
Collecting numpy (from torch==1.5.0+cu101)
Downloading https://files.pythonhosted.org/packa...-win_amd64.whl (12.7MB)
|████████████████████████████████| 12.7MB 3.3MB/s
Collecting future (from torch==1.5.0+cu101)
Downloading https://files.pythonhosted.org/packa...-0.18.2.tar.gz (829kB)
|████████████████████████████████| 829kB 1.3MB/s
Collecting pillow>=4.1.1 (from torchvision==0.6.0+cu101)
Downloading https://files.pythonhosted.org/packa...-win_amd64.whl (2.0MB)
|████████████████████████████████| 2.0MB 3.3MB/s
Installing collected packages: numpy, future, torch, pillow, torchvision
Running setup.py install for future ... done
Successfully installed future-0.18.2 numpy-1.18.5 pillow-7.1.2 torch-1.5.0+cu101 torchvision-0.6.0+cu101
WARNING: You are using pip version 19.2.3, however version 20.1.1 is available.
You should consider upgrading via the 'python -m pip install --upgrade pip' command.

C:\Users\rkean>pip install Pillow
Requirement already satisfied: Pillow in c:\users\rkean\appdata\local\programs\python\pytho n37\lib\site-packages (7.1.2)
WARNING: You are using pip version 19.2.3, however version 20.1.1 is available.
You should consider upgrading via the 'python -m pip install --upgrade pip' command.

C:\Users\rkean>pip install tqdm==4.30.0
Collecting tqdm==4.30.0
Downloading https://files.pythonhosted.org/packa...3-none-any.whl (47kB)
|████████████████████████████████| 51kB 812kB/s
Installing collected packages: tqdm
Successfully installed tqdm-4.30.0
WARNING: You are using pip version 19.2.3, however version 20.1.1 is available.
You should consider upgrading via the 'python -m pip install --upgrade pip' command.

C:\Users\rkean>pip install librosa==0.6.3
Collecting librosa==0.6.3
Downloading https://files.pythonhosted.org/packa...a-0.6.3.tar.gz (1.6MB)
|████████████████████████████████| 1.6MB 1.3MB/s
Collecting audioread>=2.0.0 (from librosa==0.6.3)
Downloading https://files.pythonhosted.org/packa...d-2.1.8.tar.gz
Requirement already satisfied: numpy>=1.8.0 in c:\users\rkean\appdata\local\programs\python\pytho n37\lib\site-packages (from librosa==0.6.3) (1.18.5)
Collecting scipy>=1.0.0 (from librosa==0.6.3)
Downloading https://files.pythonhosted.org/packa...-win_amd64.whl (30.9MB)
|████████████████████████████████| 30.9MB 117kB/s
Collecting scikit-learn!=0.19.0,>=0.14.0 (from librosa==0.6.3)
Downloading https://files.pythonhosted.org/packa...-win_amd64.whl (6.8MB)
|████████████████████████████████| 6.8MB 3.3MB/s
Collecting joblib>=0.12 (from librosa==0.6.3)
Downloading https://files.pythonhosted.org/packa...3-none-any.whl (298kB)
|████████████████████████████████| 307kB 3.2MB/s
Collecting decorator>=3.0.0 (from librosa==0.6.3)
Downloading https://files.pythonhosted.org/packa...3-none-any.whl
Collecting six>=1.3 (from librosa==0.6.3)
Downloading https://files.pythonhosted.org/packa...3-none-any.whl
Collecting resampy>=0.2.0 (from librosa==0.6.3)
Downloading https://files.pythonhosted.org/packa...y-0.2.2.tar.gz (323kB)
|████████████████████████████████| 327kB 6.4MB/s
Collecting numba>=0.38.0 (from librosa==0.6.3)
Downloading https://files.pythonhosted.org/packa...-win_amd64.whl (2.2MB)
|████████████████████████████████| 2.2MB 3.3MB/s
Collecting threadpoolctl>=2.0.0 (from scikit-learn!=0.19.0,>=0.14.0->librosa==0.6.3)
Downloading https://files.pythonhosted.org/packa...3-none-any.whl
Collecting llvmlite<=0.33.0.dev0,>=0.31.0.dev0 (from numba>=0.38.0->librosa==0.6.3)
Downloading https://files.pythonhosted.org/packa...-win_amd64.whl (13.6MB)
|████████████████████████████████| 13.6MB 3.2MB/s
Requirement already satisfied: setuptools in c:\users\rkean\appdata\local\programs\python\pytho n37\lib\site-packages (from numba>=0.38.0->librosa==0.6.3) (41.2.0)
Installing collected packages: audioread, scipy, threadpoolctl, joblib, scikit-learn, decorator, six, llvmlite, numba, resampy, librosa
Running setup.py install for audioread ... done
Running setup.py install for resampy ... done
Running setup.py install for librosa ... done
Successfully installed audioread-2.1.8 decorator-4.4.2 joblib-0.15.1 librosa-0.6.3 llvmlite-0.32.1 numba-0.49.1 resampy-0.2.2 scikit-learn-0.23.1 scipy-1.4.1 six-1.15.0 threadpoolctl-2.1.0
WARNING: You are using pip version 19.2.3, however version 20.1.1 is available.
You should consider upgrading via the 'python -m pip install --upgrade pip' command.

C:\Users\rkean>pip install opencv-python
Collecting opencv-python
Downloading https://files.pythonhosted.org/packa...-win_amd64.whl (33.0MB)
|████████████████████████████████| 33.1MB 3.3MB/s
Requirement already satisfied: numpy>=1.14.5 in c:\users\rkean\appdata\local\programs\python\pytho n37\lib\site-packages (from opencv-python) (1.18.5)
Installing collected packages: opencv-python
Successfully installed opencv-python-4.2.0.34
WARNING: You are using pip version 19.2.3, however version 20.1.1 is available.
You should consider upgrading via the 'python -m pip install --upgrade pip' command.

C:\Users\rkean>pip install numba==0.48.0
Collecting numba==0.48.0
Downloading https://files.pythonhosted.org/packa...-win_amd64.whl (2.1MB)
|████████████████████████████████| 2.1MB 1.3MB/s
Collecting llvmlite<0.32.0,>=0.31.0dev0 (from numba==0.48.0)
Downloading https://files.pythonhosted.org/packa...-win_amd64.whl (13.6MB)
|████████████████████████████████| 13.6MB 3.3MB/s
Requirement already satisfied: setuptools in c:\users\rkean\appdata\local\programs\python\pytho n37\lib\site-packages (from numba==0.48.0) (41.2.0)
Requirement already satisfied: numpy>=1.15 in c:\users\rkean\appdata\local\programs\python\pytho n37\lib\site-packages (from numba==0.48.0) (1.18.5)
Installing collected packages: llvmlite, numba
Found existing installation: llvmlite 0.32.1
Uninstalling llvmlite-0.32.1:
Successfully uninstalled llvmlite-0.32.1
Found existing installation: numba 0.49.1
Uninstalling numba-0.49.1:
Successfully uninstalled numba-0.49.1
Successfully installed llvmlite-0.31.0 numba-0.48.0
WARNING: You are using pip version 19.2.3, however version 20.1.1 is available.
You should consider upgrading via the 'python -m pip install --upgrade pip' command.

C:\Users\rkean>pip install soundstretch
Collecting soundstretch
Downloading https://files.pythonhosted.org/packa...tch-1.2.tar.gz
Requirement already satisfied: numpy in c:\users\rkean\appdata\local\programs\python\pytho n37\lib\site-packages (from soundstretch) (1.18.5)
Requirement already satisfied: scipy in c:\users\rkean\appdata\local\programs\python\pytho n37\lib\site-packages (from soundstretch) (1.4.1)
Installing collected packages: soundstretch
Running setup.py install for soundstretch ... done
Successfully installed soundstretch-1.2
WARNING: You are using pip version 19.2.3, however version 20.1.1 is available.
You should consider upgrading via the 'python -m pip install --upgrade pip' command.

[NewAgeRipper]

Your system isn't detecting PyTorch. Do you have a stand-alone GPU, or is it intel graphics?



This is also a good question^^^

I to uninstalled using Revo uninstaller and started from scratch. Same error as in my screenshot.