How to make a big house piano sound

Here are some helpful tipps to get a big house piano ... they helped me, maybe they help you too :D

  1. The Sound of the piano
    The key to a decent house piano is to find an appropriate patch. The M1 piano from the Korg Legacy Digital Edition, Cubase 4.5's Yamaha S90ES, Acoustica's Pianissimo and the Acoustic Grand Piano soundbank for UVI Workstation are all strong, bright, warm piano sounds that will make good starting points. The Korg M1 has many really great presets of Piano's. Give it a try.
  2. Velocity Levels
    When creating or recording a MIDI part, you'll likely find that your chosen piano patch is dull at all but the highest velocity levels. Try to avoid having too many dynamics in any piano parts that play alongside the drum beat – you're aiming for consistency and a strong sound, rather than expression.
  3. Widening
    In house, the kick and bass should be firmly in the centre of the mix. A piano that's also placed here will have to fight with these elements for supremacy, so use a stereo separation effect to widen it.
  4. The Frequency
    Frequency-wise, you want the piano at the top of the mix. It's possible to use EQ to bring out the high registers if they're lacking (a frequency analyser can help with this), or you could opt for a multi-band distortion, such as Cubase's Quadrafuzz or Ohm Force's Predatohm.
  5. Brighten it up
    Use the higher frequency bands to brighten the top end of the piano. When applying distortion in this way, it's easy to overdo it – this will result in obvious boosting. Turn down the effect's output until this disappears. But be careful with boosting ! Just to brighten up the top end of the piano.
  6. Layering
    Often, producers will layer another sound with the piano to add more body and character. Strings are particularly useful for this, as their slow attack is covered by the piano's strong transients, and they come to the fore after the piano note fades. You can also try with some synth sounds, like other top producers.
  7. Bassline & Piano
    If the piano is playing at the same time as the rhythm section, you're probably going to want to make sure that it falls on the same beats as the bassline. That way, they'll reinforce each other, rather than fight for space.
  8. Ambience Effects
    Finally, avoid drowning your piano in ambience effects – while these sound great on a solo part, they can clog up a busy dance tune. If you must have reverb or delay, consider using send effects, a high-pass filter and side-chain compression on it to prevent them from interfering with the mix too much.


I hope the tutorial is helpful ... If you have questions, here's the right place :)